Standard delivery incubator
The heating of this incubator is optimally tuned for both natural convection and forced air circulation; the fan can also be switched off completely, and valuable chamber loads for research, pharmaceutics, medicine, and food chemistry are warmed up very carefully.
Ventilation and Control
-
natural convection
-
continuous adjustment of pre-heated fresh air admixture
-
vent connection with restrictor flap
-
microprocessor PID-temperature controller with an integrated auto diagnostic system with fault indicator
-
one Pt100 sensor class A in 4-wire-circuit
-
integrated digital timer (1 min. up to 99 h 59 min) to switch off heating to stand-by mode
-
digital LED- display of set and actual temperature as well as remaining process time
-
resolution of display for set value and actual value 0,5 °C
- in case of a total breakdown of the sensor, the heating is switched off at approx. 3 °C above set value
- in case of failure of the switching element, the heating will be controlled by an additional relay approx. 3 °C above the set temperature
- in case of a faulty sensor (incorrect measuring values) or the total breakdown of the controller, the heating is switched off at approx. 10 °C above the max. oven temperature by the mechanical temperature limiter TB protection class 1
- for very sensitive and/or valuable load in terms of being non-reproducible, we recommend ovens of our E- and P-class guaranteeing an even higher safety standard
- w x h x d: 550 x 600 x 400 mm
- fully insulated stainless steel door with double locking and 4-point adjustment
- inner glass door
- rear zinc-plated steel
- w x h x d: 400 x 320 x 250 mm, 32 l
- easy-to-clean interior, made of stainless steel, reinforced by deep drawn ribbing with integrated and protected large-area heating on four sides
- 1 stainless steel grid
- from +30 °C (however, at least 5 °C above ambient) up to +70 °C
- 230 V (+/- 10%), 50/60 Hz ca. 440 W (during heating)
- net weight approx. 31 kg
- gross weight carton approx. 38 kg
- dimensions approx.:
- carton w x h x d: 67 x 70 x 54 cm
- the appliances must be transported upright
The Incubator Memmert INB is available in 3 different capacities 32, 53, and 108 liters. Choose according to your needs:
INB-200 32 Lt
External Dimensions: 55 x 60 x 40 cm
Internal Dimensions: 40 x 32 x 25 cm
Total capacity: 32 liters
Standard number of shelves: 1
Maximum number of shelves: 3
Weight: 28Kg
INB-400 53 Lt
External Dimensions: 55 x 68 x 48 cm
Internal Dimensions: 40 x 40 x 33 cm
Total capacity: 53 liters
Standard number of shelves: 2
Maximum number of shelves: 3
Weight: 38Kg
INB-500 108 Lt
External Dimensions: 71 x 76 x 55 cm
Internal Dimensions: 56 x 48 x 40 cm
Total Capacity: 108 liters
Standard number of shelves: 2
Maximum number of shelves: 3
Weight: 54Kg
Data sheet
- Capacity
- 32 L
53 L
108 L - Type
- Incubator