CONTEC 300G 3-channel ECG
654.87 € Reference: 516290
CONTEC ECG300G three channel ECG samples 12 leads ECG signals simultaneously and prints out the ECG waveforms with thermal printing system.
Technical specifications
Recording and displaying ECG waveforms in auto/manual mode.
Auto-measuring and auto-diagnosing the ECG wave parameters.
Prompting the state of lead off and paper lack. Switching several kinds of interface languages. Managing the case database.
CONTEC ECG300G Features:
- 3.5" TFT Color LCD display shows the working status and ECG waveform. Check the waveform before printing to save record paper.
- 12 leads ECG simultaneous acquisition, digital signal processor, to get higher quality ECG waveforms through the AC filter, baseline filter and EMG filter of the ECG signals.
- Simultaneous display of 3/6/12 leads ECG waveform, and the state of printing mode, sensitivity, speed, filter etc., to be easy for interpretation.
- Include multiform printing modes and format, such as auto 34 +1, auto 34, auto 26 +1, auto 26, auto 4*3, rhythm 4, rhythm 3, rhythm 2 and manual etc; the length of wave printing can be adjusted and the function of periodic printing is included to satisfy different applications.
- The instrument has the function of regular auto-analysis and auto-interpretation of ECG waveform parameter, provides measurement parameters such as HR, P-R interval, P Duration, QRS Duration, T Duration, Q-T interval, Q-Tc, P Axis, QRS Axis, T Axis, R(V5), S(V1), R(V5)+S(V1) etc and auto-interpretation conclusion to help reducing doctor's abundance and improve working efficiency.
- The power supply includes both AC/DC. This device includes built-in lithium polymer rechargeable battery. It can standby for 10 hours, print 260 pieces of ECG waveform and print 180 minutes continually under the best DC state to satisfy the need of visiting patients and physical examination.
- It has build-in storage with large capacity, and can memory more than 1000 cases, which is easy for the doctor review and statistic.
- Support Chinese, English, Spanish, Turkish, Polish, Italian, French, German, Portuguese, Kazakhstan, Russian operating interface, can print out such language reports of the above.
Optional (not included in the standard configuration):
ECG-Sync software can connect with the PC by USB connector to form a ECG workstation, collect real-time data to the software to analyze and print the report, and can update the old cases in the ECG machine to PC. It has optional functions of FCG, HFECG, QTD, HRV analysis, etc.(you should buy the software if need it).
Technical Specification:
- Safety Type: Class I, Type CF applied part, which has defibrillation-proof applied part
- Lead: Standard 12 leads
- Input way: Floating and defibrillation protection
- Patient leak current : <10A
- Sampling rate : 1000Hz
- A/D conversion: 12bit
- Frequency response: 0.05Hz~150Hz (-3dB, + 0.4dB)
- Time constant: >3.2s
- CMRR: >60dB, >100dB( With AC filter)
- Enduring polarization voltage: 500mV
- Noise level: <=15Vp-p
- EMG interference filter: 25Hz/35Hz (-3dB)
- AC filter: 50Hz/60Hz (>=20dB)
- Recording way : Thermal printing system(8spots/mm)
- Recording paper: 80mm(W)*20m(L)
- Sensitivity: 2.5mm/mV 5mm/mV 10mm/mV 20mm/mV 40mm/mV
- Paper printing speed:
Auto-mode: 25mm/s, 50mm/s
Manual-mode: 5mm/s, 6.25mm/s, 10mm/s, 12.5mm/s, 25mm/s, 50mm/s - Power supply: AC: 100/240V, 50/60Hz
DC: 7.4V, 3700 mAh rechargeable lithium battery - Fuse Specification: 2 pcs 5×20mm AC time lag; T1.6A/250V (Power Supply: 220V)
Content:
- Main unit
- ECG leads 1 set
- Limb elec trode clamp 1 set
- Chest elec trode 1 set
- Power connection 1 pc
- Ground wire 1 set
- User manual 1 pc
Optional (not included):
ECG-Sync software(connect the CONTEC ECG300G with the PC by USB connector to form a ECG workstation, collect real-time data to the software to analyze and print the report, and can update the old cases in the ECG machine to PC. It has optional functions of FCG, HFECG, QTd, HRV analysis, etc. You should buy the software if you need it)