Schulke & Mayr Aspirmatic cleaner for dental suction system 2lt
The Schulke & Mayr Aspirmatic® cleaner is specially designed for the disinfection of the dental suction system, the mouth rinsing basin and drain lines
The Aspirmatic® Cleaner dental tool disinfectant by Schulke & Mayr is designed to clean the dental suction system, mouthwash and drain lines. It does not contain aldehydes, is suitable for amalgam traps of all kinds, does not form annoying foam and is simple and safe to use. It is labeled according to regulation EC No. 648/2004: 5% non-ionic surfactants and its quality is proven by extensive practical tests in leading dental units. Schulke & Mayr Aspirmatic® Cleaner disinfectant has a flash point> 100 ° C (ISO 2719), a density of approximately 1.17 g / cm3, a pH of 0.9 and comes in liquid form.
During routine use of the suction unit organic and inorganic substances can be deposited, this can dry in the tubes causing contamination and also present a risk of infection for the staff members when the filter is changed. In order to avoid mechanical problems with the suction system and to ensure hygienic safety at the same time, Schulke & Mayr Aspirmatic® Cleaner dental tool disinfectant should be used as follows:
5% is to be used once or twice a week instead of the midday disinfection for special cleaning. Prepare 2l ready-to-use solution in the Schulke & Mayr Aspirmatic® system for each treatment unit. For this, stir 1,900 ml water and 100 ml concentrate. Suck approx. 1 1/2 liter through the suction tubes and pour the remaining 1/2 liter into the mouth rinsing basin. Leave it for approx. 1 to 2 hours (e.g. during lunch break) so that existing impurities can be loosened. After the end of the contact time, suck water through in order to remove loosened impurities from the tubes.
Microbiological efficacy:
- Bactericidal in accordance with VAH: 2 % (20 ml/l) 30min
- Yeasticidal in accordance with VAH: 2 % (20 ml/l) 30min
- Virucidal against enveloped viruses in accordance with DVV: 2 % (20 ml/l) 30min
Features:
- Does not contain aldehydes
- Safe and easy to use
- Does not form annoying foam
- For amalgam traps of all kinds
- Economical use
- Color: Yellow
- Flashpoint:> 100°C
- Density: 1,17g/cm3
- Form: liquid
- pH: 0,9
- 2lt
Data sheet
- Capacity
- 2 L
- Type
- Surface / Medical devices Disinfection
