Multicare In triglycerides strips (25 pcs)

Multicare In triglycerides strips (25 pcs)
zoom_out_map
chevron_left chevron_right

Triglyceride test strips for the Multicare in meter, in a pack of 25 pieces, by Biosys.

€50.00 (tax incl.) €47.17 (tax excl.)
Tax included
check In stock
Using the multiCare-in Triglycerides strips it is possible to quickly check triglycerides level in the blood. 
 
The level of triglycerides in the blood is influenced from fat feeding or from alterations of the metabolism of lipids but also from diabetes mellitus, nephrotic syndromes, pancreas problems, acute alcoholism.
 
It is important to inform the family physician to find a suitable therapy or to check-up on an existing therapy. 
 
Perform the test when you have not had anything to eat or drink (except water) for at least 12 hours.
 
How to perform triglyceride test
 
1. Insert the data-chip
It is necessary to insert the data-chip contained in the strips box in order to automatically download all required information to perform the test.
 
2. Check the number
On the display will appear the data-chip number that should correspond to the one printed in the strip vial label.
 
3. Insert the strip
Insert the reagent strip of the parameter that you would perform. The instrument will automatically switch on.
 
4. Blood application
After performing the finger prick apply the drop of blood in the white circular area of the strip coming out the instrument. The quantity of blood should be enough to create a half-circle. Wait until moving segment will appear on the display
 
5. Check the result
Check the result that appears on the display after short time. The wide characters will help the operator to execute the test and to clearly read the results.
 
6. Ejection of used strips
After performing the test it is possible to eject automatically the strip by pressing the switch on the backside of the instrument in order to avoid contamination.
TRIGLYCERIDES STRIPS

Sample to be used: Fresh capillary whole blood
Range of Measurement: 50-500 mg/dl (3,3-10,3 mmol/l)
Averange time for reading: About 30 seconds
Storage conditions: 5-30 °C
Table of results
Below 50 mg/dL (0.5 mmol/L) = LO*
Between 50 mg/dL (0.5 mmol/L) and 500 mg/dL (5.6 mmol/L) = the numerical result
Above 500 mg/dL (5.6 mmol/L) = HI**
.*Repeat the test.
**Such results mean that the Triglycerides concentration in the sample is very elevated and it indicates a serious risk. CONTACT A PHYSICIAN IMMEDIATELY.

Triglycerides Values

Less than 150 mg/dl (1.7mmol/L) = Normal
Borderline High= 150-199 mg/dL (1.7-2.2 mmol/L)
High= 200-499 mg/dL (2.3-5.6 mmol/L)
Very High= 500 mg/dL (5.6 mmol/L) or above

Packaging 25 pcs
BioSys
510904
0.10 kg
Data sheet
Factor Analysis
Triglycerides
Type
Test strips

You might also like